Chest of Drawers from 2 by 4s

This plan makes a chest of drawers from 2 by 4s and 2 by 6s for the top.  The cabinet is 22 ½ inches at the widest point, 22 inches deep and 31 inches high.

The 2 by 4 and 2 by 6 was actually taken from an old work bench and so the dimensions were dictated to some extent by the wood I had available from that and the cuts I could make from it.

I have tried to ensure all steps are covered in these plans but if you find any errors in the plans or have a question then please email me at info@andrewharriswoodwork.com to let me know.

Instructions are below but you can also download full plans.

You can download the plans here...